June Power June Power

Solis 8kw 10kw 12 Kw 15kw 3 Phase Low Voltage Hybrid Inverter AC Coupled S6-Eh3p (8-15) K02-Nv-Yd-L Solar Energy Storage Inverters

Still deciding? Get samples of $ !
Order Sample

Product Description

Basic Information
Model NO.S6-EH3P(8-15)K02-NV-YD-L
PhaseDual
Output Power>1000W
CertificationCE
TypeDC/AC Inverters
Power SourceSolar Power
Nature of Wave StringSine Wave Inverter
Product NameThree Phase Low Voltage Inverter
Inverter TypeHybrid Solar Power Inverter
Battery TypeVRLA/ Gel / Deep Cycle / Lithium
Output Voltage220/230/240VAC
Battery Voltage24V/48V DC
About Our Technology
🏆

Top supplier for Lithium ion Battery solutions with over 10 years of experience. Specializing in 3.2v prismatic lifepo4, cylindrical 3.7v lithium batteries, and comprehensive Energy Storage Systems.

Inverter Display
Product Description
Description 1 Description 2 Description 3
Battery Cell Specifications
Model Number Specification (V & Ah) Impedance (mΩ) Weight (kg)
CATL 50AH3.2V 50Ah≤2.01.38
CATL 120AH3.2V 120Ah≤0.72.86
CATL 202AH3.2V 202Ah≤0.253.84
CATL 280AH3.2V 280Ah≤0.35.34
CATL 314AH3.2V 314Ah≤0.185.5
System Configuration Note:
  • For 48V system: 16 pieces required
  • For 24V system: 8 pieces required
  • For 12V system: 4 pieces required
Packing & Shipping
📦

• High hardness custom sponge for battery reinforcement.

• 5 layers of dangerous goods export corrugated cartons.

• Insulation tape applied to positive and negative terminals.

• Each cell is labeled with test data before delivery.

Packing Process Customer Photos
Frequently Asked Questions
1. What should I do before assembling the DIY battery pack? Cells must be balanced (at the same voltage) before assembly. We ensure each single battery is tested for voltage, resistance, and appearance before shipment.
2. Do you test the batteries prior to shipping? Yes, we perform capacity tests with less than 2% margin of error. Voltage deviation is kept under 0.01V and resistance deviation under 0.05mΩ.
3. Are busbars and bolts included with the batteries? Yes, each battery comes with 1 piece of busbar and 2 pieces of bolts or studs for free.
4. What situations are excluded from the return policy? Returns are not accepted for damages caused by incorrect assembly, such as burning the protection board, charger failure, or battery bulge due to lack of BMS protection.
5. What is the condition for returning a battery? Batteries must be unused, with intact electrodes, no welding, no wear, and in good appearance. The buyer is responsible for shipping fees for returns.
6. Are these batteries ready for direct use? These are prototype cells without a protection board. You must purchase and install a matching BMS (Battery Management System) before use.

Related Products